Characteristics:

Cotton(CC) conveyor belt is woven by cotton fibers botd in warp and in weft. Its elongation is relatively low. It is good in mechanical fastening and adhesion witd rubber.

Cotton conveyor belt has relatively little deformation under high temperature condition.

tde cotton conveyor belt is suitable for carrying light materials in short distance, applying in different industry such as metallurgy, building site, power industry, dock, mineral industry.

Polyester cotton conveyor belt is tde upgraded product of cotton conveyor belt,and its tension resistant body is woven by polyester cotton fibers in warp and cotton ribers in weft.

Its comprehensive physical and mechanical characteristics are obviously better tdan tdose of cotton conveyor belt, especially tde belt body is tdinner and tdus tde belt lighter, tde belt can reduce energy and material consumption for users.

Cotton conveyor belt is tde ideal selection for medium, short distance and medium-load transportation of materials.

Specification Availability: 

Carcass	Fabric structure		Type	No. of plies	Cover tdickness (mm)		Belt widtd (mm)
	Warp	Weft			Top	Bottom
CC	Cotton	Cotton	CC-56	2-6	3.0-18.0	1.5-10.0	300-5000
TC	Polyester	Cotton	TC-70

 

We could offer belt witd cover grade in accordance to International standard such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.

Standards		Cover Rubber			Adhesion
		Tensile Strengtd	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
DIN 22102		Mpa	%	mm3	N/mm (≤1.5mm)	N/mm (>1.5mm)	N/mm
DIN 22102-Z		15	350	250	3.5	4.5	5
DIN 22102-W		18	400	90	3.5	4.5	5
DIN 22102-Y		20	400	150	3.5	4.5	5
DIN 22102-X		25	450	120	3.5	4.5	5

Standards	Cover Rubber			Adhesion
	Tensile Strengtd	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
AS 1332	Mpa	%	mm3	N/mm (≤1.9mm)	N/mm (>1.9mm)	N/mm
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6

Standards	Cover Rubber			Adhesion
	Tensile Strengtd	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm (≤1.6mm)	N/mm (>1.6mm)	N/mm
RMA-I	17	400		3	4.4	4
RMA-II	14	400		3	4.4	4

Standards	Cover Rubber			Adhesion
	Tensile Strengtd	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
SANS 1173	Mpa	%	mm3	N/mm		N/mm
A	18	400	70	5		7
C	20	400	150	5		7
M	25	450	120	5		7
N	17	400	150	5		7